Facebook Instagram Youtube Envelope
  • +603-6141 8364
  • info@shamawar.com.my
  • Kota Damansara, Selangor
Get Quote
Cable Joint Tray
Cable Joint Tray - Image 2
Cable Joint Tray - Image 3
Cable Joint Tray - Image 4

Cable Joint Tray

The High Voltage (HV) Cable Joint Tray is used as an accessory for HV aerial bundled cable(ABC) system. Mainly, the cable tray is used to provide support for electrical cables that are usually used for power distribution, communication and control. It is designed to hold and support 11kV and 33kV ABC straight through joints on 10M-19-5kN spun concrete poles. The HV Cable Joint Tray is capable of withstanding a minimum load of 100 kg. You can also attach cable cleats onto the cable tray to provide extra protection.

• Composite Cable Joint Tray is an accessory for MV ABC system and designed to hold and support the 11 kV and 33kV ABC straight through joints on 10m-19-Skn spun concrete poles. • Capable of withstanding a minimum load of 100 kilograms. • Secure Of aluminium conductor joint is with cable ties or cable cleats (optional)

Related Products

Nylon Cable Tie

Cable tie designed to secure the Aerial Bundled Cable. The usage is suitable for outdoor use. The material Nylon 66 is able to ensure the cable tie is weather resistant and UV light stabilized material. The cable tie is tested to hold the tensile strength up to 300N
View Specifications

Mini Isolator Switch

The isolating switch is intended for outdoor usage and suitable for TNB road lighting system especially during service and maintenance. This mini isolator is designed with prewired connecting cord load and line with capability of IP66.
View Specifications

LV Arrester

Low voltage metal oxide surge arresters with a silicone housing NNO and MOSPO are designed for installation in low voltage power lines or junction boxes with voltages up to 1 kV.They serve as the initial level of protection against surges and other transients. The varistors of low voltage surge arresters NNO and MOSIPO are directly molded by silicone rubber, providing them with a high level of ingress protection rated at IP 67.
View Specifications

Insulated Piercing Connector (IPC) Holder

MODEL : IPCH-01

Insulating Piercing Connector Holder, IPCH-01 made from Aluminum Alloy high grade Tool was tested according to NFC 033-020:2013 and can with stand torque up to 40kN.
  • Weight : 450 g.
  • Minimum clamping jaw: 40 mm
  • Maximum clamping opening: 70 mm
View Specifications