Projects – Shamawar Group of Companies

• Composite Cable Joint Tray is an accessory for MV ABC system and designed to hold and support the 11 kV and 33kV ABC straight through joints on 10m-19-Skn spun concrete poles. • Capable of withstanding a minimum load of 100 kilograms. • Secure Of aluminium conductor joint is with cable ties or cable cleats (optional)

IPC is used for simultaneous penetration of insulation on LV ABC conductors and for connecting of conductors for street lighting. Connector is manufactured in such way that it enables connection of LV ABC and branch conductor regardless of whether it is an aluminum or copper conductor. The body of the connector is made of Heat and UV resistant plastic and the elastomer insert eliminates the appearance of electrolytic corrosion since it prevents the appearance of moisture at contact points. The contacts are protected with electric contact grease. Mounting under voltage is possible but with mandatory use of adequate protection equipment. Ring-spanner or tubular spanner.

MODEL : IPCH-01

Insulating Piercing Connector Holder, IPCH-01 made from Aluminum Alloy high grade Tool was tested according to NFC 033-020:2013 and can with stand torque up to 40kN.

Weight : 450 g.
Minimum clamping jaw: 40 mm
Maximum clamping opening: 70 mm

Low voltage metal oxide surge arresters with a silicone housing NNO and MOSPO are designed for installation in low voltage power lines or junction boxes with voltages up to 1 kV.They serve as the initial level of protection against surges and other transients. The varistors of low voltage surge arresters NNO and MOSIPO are directly molded by silicone rubber, providing them with a high level of ingress protection rated at IP 67.

Suspension clamp PS 1500 is designed to suspend LV ABC with insulated neutral messenger of cross-section between 16 mm² and 71,5 mm². It is resistant to environmental and mechanical effects and UV radiation since it is made of material of high tensile strength and stable structure. Suspension clamp allowsturning angle of 30/60°. It is installed using no tools and does not contain parts which can fall off during installation.

The isolating switch is intended for outdoor usage and suitable for TNB road lighting system especially during service and maintenance. This mini isolator is designed with prewired connecting cord load and line with capability of IP66.

Hubbell offers both IEEE and IEC compliant distribution arrester products. The application may dictate the use of a different design to handle excessive lightning duty, high TOV or offer superior equipment protection.Distribution arresters are commonly applied on system voltages from 3 – 46 kV. Use this guide to help select the correct arrester classification for your specific application. Other designs are available for unique applications.

IEC Class Station Medium Polymer Housed Surge Arrester

High quality solid-core station class arresters qualified to both IEEE and IEC arrester standards

PVI-LP arresters comply with the latest revision of IEC 60099-4
Long lasting ESP^TM housing material with superior mechanical strength and electrical characteristics
Robust sealing system protects internal components from moisture ingress to extend service lifetime
High quality MOV discs made in Wadsworth, Ohio since 1978

Neutral link 100A was designed for continuous operation on a 3-phase, 415V, 50 Hz multiple neutral earthed system.Housing Made from weather and UV resistant, fire retardant insulating material. A hole/slot each at the top and bottom.Manufactured in 2 parts i.e., top cover and base molding. Sealing provided to seal the top cover to the base Base moldingTerminal Block Connector Design with a hole Internal Diameter = 9mm, at least 2 pinching screws/stud of 8mm(M8) per hole, with incoming and outgoing hole. Inner side of hole is with threaded.Pinching screw and terminal shall made of tin plated brass. Pinching screw and terminal shall be electro- tin plated in accordance to BS 1872. Filled sufficient quantity of electrical conductive oxide inhibiting compound.

Cable tie designed to secure the Aerial Bundled Cable. The usage is suitable for outdoor use. The material Nylon 66 is able to ensure the cable tie is weather resistant and UV light stabilized material. The cable tie is tested to hold the tensile strength up to 300N

ANSI C119.4, full tension, Class A connector (95% of conductor breaking strength unless otherwise noted)
Color coded end funnel guides for easy identification
Factory inhibitor protected
Fastest method of splicing aluminum, aluminum alloy and ACSR conductor

Photo Electric Control Unit (PECU) is an electronic switch which is triggered at a specific light level. Based on thermal, electronic or microprocessor technology, photocells operate in a number of ways depending of the level of accuracy required.Dusk to dawn sensing – generally inaccurate light detection where the lamp switches ‘ON’ as night falls and switches ‘OFF’ shortly after sunrise.Light level detection – more accurate light detection where the photocell switches at pre-set light levels both at sunset and sunrise, typically 70/35, 55/28, 35/18 or 20/20 lux. Negative switching sets the lamp to ‘OFF’ at a lower level than ‘ON’, with positive switching acting in reverse.

Our Products

Cable Joint Tray

Insulated Piercing Connector (IPC)

Insulated Piercing Connector (IPC) Holder

MODEL : IPCH-01

LV Arrester

Lv Dead End Clamp

lv Suspension Clamp

Mini Isolator Switch

MV Arrester

Neutral Link

Nylon Cable Tie

Overhead Mid Span Joint

Photo Electric Control Unit